SMC Networks SMC EZ Connect Turbo SMC2435W - Manual (Page 12)

Step 3: The Device Status shows that "This device is working
properly". If there are any error messages displayed here, you will
need to right-click the SMC adapter and click [Uninstall]. Then reboot
the machine and go through the installation process again.
Utility Installation
NOTE: If you completed [Option #1] to install the drivers, then
you have already installed the utility as well. Please skip to the
next sec-tion. If you completed [Option #2], please complete
the steps below to install the utility.
Step 1: Insert the Driver, Utility and Documentation CD.
Step 2: Click [Start], click [Run] and type [?:\Utility\setup.exe]
(Note: The ? equals the letter of your CD-ROM drive. In most
cases, this is D.)
Step 3: The installation wizard will begin.
Step 4: Click [Next >] to continue.
Step 5: You will be given the option to choose the location
where the Configuration Utility will be installed. It is
recommended to leave this at the default value. Click [Next >]
to continue.
Step 6: Please set the selection to [Yes] and click [Finish] to
reboot the machine. Then once the OS is back up and running,
you should see a new icon in your system tray that launches the
wireless card utility
English
English
21 22