SMC Networks SMC EZ Connect Turbo SMC2435W - Manual (Page 3)

Driver Installation Option #1 (Recommended)
Windows 98/Me/2000/XP
NOTE: Installation processes such as these usually require the use of
your original, licensed copy of Windows. Please have your Windows
CD on hand BEFORE proceeding with the installation.
This Installation method makes the process as simple and Plug-and-
Play as possible. Simply run the driver/utility program, reboot your
machine and insert your EZ Connect TURBO Wireless Card. It's as easy
as 1-2-3.
Step 1: Insert the Driver, Utility and Documentation CD.
Step 2: Click [Start], click [Run] and type [?:\Utility\setup.exe]
(Note: The ? equals the letter of your CD-ROM drive. In most cases,
this is D.)
Step 3: The installation wizard will begin.
Step 4: Click [Next >] to continue.
English
English
5) The card will be automatically installed upon insertion. Once
complete, you may take advantage of the wireless functionality
this adapter has to offer.
SMC2402W: Installation Instructions
1) Turn on your computer and insert the Driver, Utility, and
Documentation CD. Run the utility software and then reboot when
requested.
2) Switch off the computer, unplug the power cord, and remove the
computer's cover. Select an unused PCI bus-master slot and remove
its protective bracket.
3) Carefully insert the card and press until all edge connectors are
firmly seated inside the slot. Then, screw the card's bracket
securely into the PC's chassis and put the computer's cover back in
place.
4) Boot up the machine.
5) The card will be automatically installed during the Operating
System's boot-up process. Once complete, you may take advantage
of the wireless functionality this adapter has to offer.
3 4