Sony BM-845D - Manual (Page 12)

BM-845D. 3-859-341-11. U. E
12 Operations
To use the unit as a
transcribing machine, connect
the foot control unit (not
supplied).
For connection, see page 6.
Transcription
Fast forward
Rewind Start/Stop
(Listen)
Foot control unit
1
2
3
4
5
7
6 9
8
Tip on Transcription
Erase the tape when
transcription is finished.
1
Set POWER to ON.
2
Insert a cassette. (See page 7.)
3
Set SPEAKER to BUILT-IN.
4
Press AUTO STOP to make AUTO STOP disappear (AUTO
STOP function is off). (See page 13.)
5
Set TAPE SPEED to the same tape speed as that used for
recording (dictation).
6
Press REW to rewind the tape.
When the tape is completely rewound, a beep is heard and the unit
automatically shuts off.
7
Press RESET to set the digital counters to zero.
8
Keep the right side of the foot control unit pedal
depressed to listen to the tape.
9
Adjust VOLUME and TONE.
To stop the tape
Release the pedal.
Notes
If you play back in the AUTO
STOP mode and the cassette was
not recorded using a Sony
Professional Dictating Machine
(BM-531, 560, 570, 577, 820, 845,
850, 880, 890, etc.),
– an audio signal may be detected
as an electronic index signal
during fast foward or rewind
and the unit will automatically
stop with a beep.
– the auto back space function
may not operate correctly.
– the switching time of the
operation modes during fast
forward or rewind may be
delayed.