Sony BM-845D - Manual (Page 5)

5 Introduction
BM-845D. 3-859-341-11. U. E
Connect the foot control unit (not supplied) (6).
Set POWER to ON.
Insert the cassette (7).
Set SPEAKER to BUILT-IN or connect earphones.
.
.
.
.
.
Press AUTO STOP to make the AUTO STOP indication disappear (13).
Disconnect the hand control unit.
Transcription
.
.
Set TAPE SPEED.
Keep the right side of the pedal depressed.
(When the foot control unit (not supplied) is connected.) (14)
or
Set the function selector of the hand control unit to LISTEN.
(When the hand control unit is connected.) (14)
or
Press LISTEN.
(When the BM-845 is used for operation.) (14)
Adjust the starting point for playback with the use of
REVERSE TIME. (When the foot control unit is used.)
Set SPEED CONTROL to ON and adjust SPEED.
.
After transcribing, stop the tape.
Release the pedal. (When the foot control unit (not supplied) is
used.) (14)
or
Set the function selector to STOP. (When the hand control unit
is used.) (14)
or
Press STOP. (When LISTEN on the BM-845 is pressed to play
back the tape.) (14)
.
Adjust VOLUME and TONE.
.
.
Erase the tape (15).
.
Press REW.
When the tape reaches the beginning of the dictated material, a
beep tone is heard and the unit automatically shuts off (12).
Press RESET to set the digital counter to zero.
.