Note on lcd panel, Maintenance, Cleaning – Sony NV-U84 User Manual

Page 11: Fuse replacement

Advertising
background image

11

Data may be damaged in such occasions:

– “Memory Stick Duo” is removed or the system is

turned off during a read or write operation.

– “Memory Stick Duo” is used in a location subject to

static electricity or electrical noises.

We recommend that you backup any important data.
Do not bend, drop or apply strong shock to the

“Memory Stick Duo.”

Do not disassemble or modify the “Memory Stick

Duo.”

Do not allow the “Memory Stick Duo” to get wet.
Do not use or store the “Memory Stick Duo” in a

location that is subject to:
– Extremely high temperature, such as in a car

parked in the sun

– Direct sunlight
– High humidity or places with corrosive substances

Do not touch the “Memory Stick Duo” connector with

your finger or metallic objects.

You cannot record, edit or delete data if you slide the

write-protect switch to LOCK.

When you slide the write-protect switch of the

“Memory Stick Duo,” use a thin-pointed device.

When you use a “Memory Stick Duo” without the

write-protect switch, be careful not to edit or delete
the data by accident.

When you write on the memo area of the attached

label, do not write forcefully.

When you carry or store the “Memory Stick Duo,” put

it in the case supplied with it.

* Abbreviation for “Memory Stick Micro.”

Note on LCD panel

Some stationary blue, red or green dots may
appear on the monitor. These are called “bright
spots,” and can happen with any LCD. The LCD
panel is precision-manufactured with more than
99.99 % of its segments functional. However, it
is possible that a small percentage (typically
0.01 %) of the segments may not light up
properly. This will not, however, interfere with
your viewing.

Maintenance

Cleaning

• Clean the surface of the suction cup with a soft,

wet lint-free cloth if it becomes dirty and
attachment strength weakens.
Be sure to dry the suction cup before
reattaching.

• Clean the display window with a commercially

available cleaning cloth.

Note
If the suction cup leaves a trace on the windshield,
wipe with water.

Fuse replacement

When replacing the fuse in the car battery
adapter, be sure to use one matching the
amperage rating stated on the original fuse
(2.5 A). If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.

Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as this
could damage the unit.

Connector

Write-protect
switch

Memo area

Advertising
This manual is related to the following products: