Samsung DVD-VR375 - Manual (Page 34)

_ system setup
system setup
Digital Out
Selects audio options for signals output from the DIGITAL AUDIO
OUT (COAXIAL).
The following setup items switches the method of outputting audio
signals when you connect a component such as an amplifier
(receiver) with a digital input jack. For connection details, see "AV
Receiver Connections" on page 24.
If you connect a component that does not accept the selected audio
signal, a loud noise (or no sound) will come out from the speakers, and
may affect your ears or cause speaker damage.
Dolby Digital (DVDs only)
Selects the type of Dolby Digital signal.
D-PCM : Select this when the recorder is connected to an audio component that does not have a built-
in Dolby Digital decoder.
Dolby Digital : Select this when the recorder is connected to an audio component with a built-in Dolby
Digital decoder.
DTS (DVD ViDEOs only)
Selects whether or not to output DTS signals.
On : Select this when the recorder is connected to an audio component with a built-in DTS decoder.
Off : Select this when the recorder is connected to an audio component without a built-in DTS decoder.
MPEg (DVD ViDEOs only)
Selects the type of MPEG audio signal.
PCM : Select this when the recorder is connected to an audio component without a built-in MPEG
decoder. If you play MPEG audio sound tracks, the recorder outputs stereo signals.
MPEg : Select this when the recorder is connected to an audio component with a built-in MPEG decoder.
M `
~
~
~
~
~
~
> Move s Ok r Return e Exit
12:00 Audio
Title List
Timer
Edit
Dubbing
Disc
Setting
Setup
Digital Out : On
Downmix : Dolby Surround
Audio DRC : Standard
Scan Audio : On
Surround : Off
AV Audio Input : Stereo
✔ On
Off
> Move s Ok r Return e Exit
12:00 Digital Out
Title List
Timer
Edit
Dubbing
Disc
Setting
Setup
Dolby Digital : D-PCM
DTS : Off
MPEG : PCM
01589T(00)-VR370,375-XSA-ENG.ind34 34 2009-04-13 오후 4:15:01