Samsung DVD-VR375 - Manual (Page 65)

English _
●
rECOrDing
CHECK rEMaining TiME
Press inFO button on the remote control.
The following information will be displayed.
(Current deck status, recording Mode, remaining time, input channel,
current time.)
SPECiaL rECOrDing FEaTUrES
While a recording is in progress, you can watch a different media, or add recording time in preset increments.
Watch a different media during recording
You can watch a DVD during VCR recording or watch a Video tape during DVD recording.
During VCR recording, insert a DVD in the DVD deck. The output will automatically change to the DVD
and start playback. (DVD-Video discs only)
During DVD recording, insert a Video tape in the VCR deck.
The output will automatically change to the VCR and start playback.
(Only if tape is missing the safety tab)
add recording Time
Refer to the One-Touch Recording (OTR).
(See page 60)
recording DVD and VCr at the same time
You can record DVD and VCR at the same time, but both modes must be set up to record separately.
Press the DVD/VCr button to set the unit to DVD or VCR mode.
Choose input mode Prog.1, AV1, AV2 or DV input (DVD-VR375 only) for DVD or VCR.
Choose rEC SPEED for DVD or VCR.
Press rEC button for DVD or VCR.
When the DVD Recorder & VCR is connected to your TV using the HDMI or component video cables, the VCR's
playback screen on the video tape will not display during DVD recording.
You cannot record different channels at the same time.
The DVD and VCR cannot start recording at the exact same time.
1.
~
~
.
.
~
~
~
~
M `
`
`
Stop
0:00:00
SP
Rem 02:00
Prog. 1 Stop
0:00:37
LP
Rem 01:59
Prog. 1
DVD-RW VCR
01589T(00)-VR370,375-XSA-ENG.ind65 65 2009-04-13 오후 4:15:41