Samsung DVD-VR375 - Manual (Page 64)

_ recording
recording
BaSiC VCr rECOrDing
Before starting
1. Check TV channel and Antenna connections.
2. Check the remaining time on the tape.
You can record a TV show in progress by inserting a blank tape and pressing the ! (REC) button.
You can even add time in preset increments up to 6 hours by pressing the ! (REC) button repeatedly.
Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece
of tape.
Warning : Do not cover this opening unless you are sure you want to record over the tape.
Insert a blank VHS tape into the VCR deck.
Make sure the tape is long enough to record the entire programme.
Press the number buttons or the PrOg/TrK (,/.) buttons to select the desired channel.
Press the inPUT SEL. button to select Prog.1, AV1, AV2 or DV input (DVD-VR375 only).
if recording from an external device connected to the input jacks of the recorder.
Press the rEC SPEED button on the remote control to set the Record Speed to one of the following
options:
SP – Standard Play, for best picture quality.
LP – Long Play, for maximum recording time (2 times SP).
The selected Record Speed will appear on the front panel display and on-screen display.
Maximum recording Time - SP vs. LP
Tape Length SP (Standard Play) Recording Times Data Rates
E180 Approx. 3 hrs Approx. 6 hrs
E240 Approx. 4 hrs Approx. 8 hrs
E260 Approx. 4 hrs 40 mins Approx. 9 hrs 20 mins
E300 Approx. 5 hrs Approx. 10 hrs
When you watch or record on the VCR during DVD Recording, some function buttons may not operate.
Press the ! (rEC) button on the remote control or front panel.
For options while recording is in progress, see “Special Recording Features”.
To stop recording
Press the STOP button to stop a recording in progress.
M `
J `
1.
~
.
.
~
~
M `
M `
.
01589T(00)-VR370,375-XSA-ENG.ind64 64 2009-04-13 오후 4:15:41