Samsung DVD-VR375 - Manual (Page 20)

0_ connecting & setting up
connecting & setting up
COnnECTing DVD rECOrDEr & VCr TO THE TV USing THE rF
CaBLE
Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables.
Remove the aerial or network input cable from the television.
Connect this cable to the 75
Ω aerial jack marked on the rear of your DVD Recorder & VCR.
Plug the RF Cable supplied into the jack on your DVD Recorder & VCR.
Plug the other end of the RF Cable into the connector previously used for the aerial on the television.
The RF cable connection of this product sends only signal of TV.
You must connect Audio/Video cables to watch a DVD and Video tape from your DVD Recorder & VCR.
M `
1.
.
.
.
M `
`
To rF in
To rF OUT
To anT inPUT
01589T(00)-VR370,375-XSA-ENG.ind20 20 2009-04-13 오후 4:13:08