Samsung DVD-VR375 - Manual (Page 21)

English _1
COnnECTing DVD rECOrDEr & VCr TO THE TV USing THE
aUDiO/ViDEO CaBLE
You can connect your DVD Recorder & VCR to the television using the Audio/Video cable if the appropriate
input is available on the television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your DVD Recorder & VCR
Regardless of the type of connection chosen, you must always connect the RF Cable supplied. Otherwise, no picture
will be visible on the screen when the DVD Recorder & VCR is switched off.
Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables.
Connect the RF Cable.
Connect one end of the Audio/Video cable to the Video output and Audio L, R output jack on the rear of
the DVD Recorder & VCR.
Plug the other end into the appropriate connector on the television.
~
~
M `
`
1.
.
.
red Yellow White
aerial
aerial cable
rF cable
●
COnnECTing & SETTing UP
01589T(00)-VR370,375-XSA-ENG.ind21 21 2009-04-13 오후 4:13:25