Sanyo DP52848 - Manual (Page 12)

12 Need help? Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
D
ELETING
C
HANNELS FROM
S
CAN
M
EMORY
3 Use the CHANNEL
▲▼ or NUMBER keys to
select the channel you want to Delete.
NOTE: Use the 1– – key to select cable channels
above 99.
4 Press ENTER to Delete the channel from
Channel Scan Memory.
5 Press EXIT to return to normal TV viewing.
This Display
appears after
you press
ENTER .
After 3 seconds the TV screen will display “Delete?”
After 3 seconds the TV screen will display “Add?”
CHANNEL SCAN MEMORY
Channel Scan Memory is a database of active
channels you scan using the CHANNEL
▲▼ keys.
Customize it by deleting or adding channels.
1 Press the MENU key on the remote control to
display the Main menu. (See page 7.)
2 Use the CURSOR
▲▼ keys to highlight
Channel Scan Memory. Press ENTER.
A
DDING
C
HANNELS TO
S
CAN
M
EMORY
3 Use the CHANNEL ▲▼ or NUMBER keys to
select the channel you want to Add.
NOTE: Use the 1– – key to select cable channels
above 99.
4 Press ENTER to Add the channel to Channel
Scan Memory.
This Display
appears after
you press
ENTER .
Channel Scan
Memory Screens
IMPORTANT FACTS: When a digital channel is deleted,
all of that channel’s sub-channels are deleted as well.
Only previously deleted digital channels can be added
back to the Channel Scan Memory.
Tune to “deleted” channels using the number keys.
If one digital sub-channel is added back to the Channel
Scan Memory list, all of that channel’s sub-channels will
be added back.
ON-SCREEN MENU OPERATION (CONTINUED)