Siemens HIPATH 8000 - Manual (Page 16)

Getting to know your OpenStage phone
16
Getting to know your OpenStage phone
The following sections describe the most frequently used operating ele-
ments and the displays on your OpenStage phone.
The user interface of your OpenStage
The diagram shows an OpenStage 60/60 G SIP, the description applies to
both product variants.
1 You can make and receive calls as normal using the handset.
2
The large
graphic display permits intuitive operation of the phone
page 30.
3
The mode keys allow easy operation of the applications featured on
your telephone. To select a tab within a function press the relevant
key repeatedly until the required tab is displayed
page 22.
4
Use the TouchGuide to navigate conveniently through the applica-
tions on your telephone page 23.
5
You can customize your telephone by assigning phone numbers and
functions to the
programmable sensor keys page 25.
6
The function keys allow you to call up the most frequently used
functions during a call (e.g. Disconnect) page 21.
7
Audio keys are also available, allowing you to optimally configure the
audio features on your telephone
page 21.
8
The TouchSlider allows you to adjust the current volume (e.g. tele-
phone rings - ringer volume) page 21.
9
Incoming calls and new voice messages are visually signalled via the
alert bar.
10
The keypad can be used to enter phone numbers and text
page 28.
7
10
1
4
6
5
9
3
8
2