Siemens HIPATH 8000 - Manual (Page 96)

Step by Step
Programmable sensor keys
96
Select and confirm the option shown.
Feature toggle
Only available for Hunt group functions ( page 193).
S
Hold down the sensor key to which a function should be
assigned until the programming prompt is displayed.
Confirm to begin programming. The sensor key illumi-
nates continuously.
Select and confirm the option shown.
Select and confirm the function in the context menu.
Select and confirm to change the key labeling.
j
Enter and confirm the label you want (for example,
"busy/free").
Select and confirm this option to enter a code.
j
Enter the code (see Code list table page 206) and
confirm.
Select and confirm the option shown.
Enables a normal call
Enters a pause, for example, for internation-
al dialing
Icon Function
Save & exit
The repertory dial can be up to 40 characters long.
If the prompt is not displayed or a programmed
function is not executed, then you can only launch
key programming via the user menu (ask your ad-
ministrator about the current setting).
OK
Normal
Feature toggle
Label
Setting
Save & exit