Siemens HIPATH 8000 - Manual (Page 37)

Getting to know your OpenStage phone
37
Context menus
If the arrow icon
g
appears next to a selected entry, additional menu lev-
els or selection options are available in the form of a context menu. Navi-
gate through these options using the TouchGuide
page 23.
You can select and confirm the required functions using the TouchGuide
page 23.
After a connection is set up – you are called or you make call – the context
menu appears automatically under the current connection for the config-
ured time (e.g. 20 seconds).
You can define how long the context menu should be displayed. You can
deactivate the automatic display so that the
g key
must be pressed to
see the context menu of the connection page 229.
Idle display context menu
When you press
g on the TouchGuide in idle state, the following functions
are available (if activated):
Consultation First entry
(selected when the menu is called up)
Hold
Blind transfer call
Disconnect
Directed pickup
Selected entry
Start conference
Do not disturb on
Repeat dialing 1234
Ringer off
Mobile logon
Cancel call backs
Selected entry
Only available when configured to support
mobility
First entry (selected when you call up
the menu, if you have already dialled a
phone number and the call journal is ac-
tivated
page 168)
Directed pickup