Siemens HIPATH 8000 - Manual (Page 97)

Programmable sensor keys
97
Step by Step
Forwarding
S
Hold down the sensor key to which a function should be
assigned until the programming prompt is displayed.
Confirm to begin programming. The sensor key illumi-
nates continuously.
Select and confirm the option shown.
Select a forwarding type:
•
Forward all calls
• Forward no reply
• Forward busy
Select and confirm the function in the context menu.
Select and confirm the option shown if you want to
change the label on the graphic display.
j
Accept or edit the label and confirm.
Select and confirm this option to enter the forwarding
destination.
j
Enter and confirm the phone number of the forwarding
destination.
Select and confirm the option shown.
If the prompt is not displayed or a programmed
function is not executed, then you can only launch
key programming via the user menu (ask your ad-
ministrator about the current setting).
OK
Normal
Forward all calls
Label
Setting
Save & exit