Sanyo DS24424 - Manual (Page 13)

Adding or Deleting Channels
1. Press MENU key.
2. Use the
▲/▼ keys to highlight CH. Scan Memory.
3. Press the + key to highlight channel number entry area.
4. Enter the channel number you want to add or delete (example): C34. For cable channels
above 99, press and hold the 1 key until C1– – appears. Then enter the other two numbers.
Aspect Ratio
Use this feature when digital equipment is connected to the component input jacks. The
4:3 setting is for normal viewing. The 16:9 setting changes the picture image to wide-screen
viewing with minimal portion of top and bottom compressed.
1. Press
MENU key.
2. Use the ▲/▼ keys to highlight Aspect Ratio.
3. Press the – /+ keys to select 4:3 or 16:9.
Menu Language
Press MENU key to exit
Aspect Ratio Aspect Ratio ➧4:3 4:3 16:9
Aspect Ratio
Menu Language
Select channel using Select channel using ▲▼ ▲▼ , , 0~9 keys 0~9 keys
Press MENU key to exit Press MENU key to exit
CH. Scan Memory C 34 C 34 Deleted
5. Press the + key to change the present setting.
Example: Added will change to Deleted. This
takes about three seconds. During that time, the
word “Added” or “Deleted” will become yellow.
6. Use the 0~9 or
▲▼ keys to choose other channels
to delete or add, or press the MENU key to exit.
Add / Delete Channel, Aspect Ratio, Closed-Captioning
13
CAPTION1: This is the main mode used for program captioning (words match the program
you are watching). These captions are generally one or two lines.
CAPTION2: An alternative mode for program captioning. Caption2 may be used by the
broadcaster to provide captions in another language, such as, Spanish or French.
TWO OUTS AND TWO STRIKES
Caption1/ 2
Captioning is text information transmitted along with the picture and sound so it can be dis-
played on the TV screen. Because different types of captions can be transmitted with the TV
signal, separate captioning modes are provided. The captioning modes recognized by this
model are: Caption1 and Caption2. Local broadcasters decide which caption signals to transmit.
QuickTips
■ Channels deleted
from scan memory
can be selected
with the number
keys.
■ Restoring deleted
channels, use the
on-screen menu to
manually add chan-
nels or start CH.
(Channel) Search
from the menu.
It may take a few
minutes to search
thru the available
channels.
OR
■ Press the RESET
key twice.
■ Channel number
will not display
continuously when
captioning is on.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
Closed-Captioning
QUIKCAP: Allows captions to toggle on and off with the Mute function. Press the MUTE key on the remote control to
block the TV sound; the captions display automatically. Press the MUTE key again to restore the sound, the captions will
disappear. Quikcap displays program captions in the Caption1 mode.
Set ting Captions
1. Press the CAPTION key on the remote control.
2. Press the 0 key to select options: OFF, CAPTION1, CAPTION2, or QUIKCAP.