Sanyo DS24424 - Manual (Page 6)

Connecting a DVD Player or other equipment
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
Connect a DVD Player or other digital equipment’s interlaced Component Video Output to
the TV Component Video Input (Y-Pb-Pr) Jacks.
Connect the DVD Player’s Audio Output to the TV A/V2 Audio Input (L/R) Jacks.
Press POWER to turn on the TV. Turn on external equipment also.
To access Audio/Video inputs, press the INPUT key to select COMPONENT2.
Notes: DVD Player component output must be set to Interlaced (480i).
Audio/Video Input (AV2) and Component inputs share the same audio (R/L)
input jacks.
Connect equipment to the component inputs or A/V2 inputs, but not both sets at
the same time.
Using the Component Video and Audio Input Jacks
QuickTips
■ You may be able
to use the TV
remote control
to operate your
DVD Player. (See
pages 9 ~11).
■ A solid Blue screen
with COMPONENT2
displayed means
that the Compo-
nent Video mode
is selected, but
no signal is being
detected at the Com-
ponent jacks. Check
connection, and
turn on external
equipment.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
Y P B /C B /C R P R
COMPONENT VIDEO OUT AUDIO OUT
R L
DIGITAL OUT
COAXIAL
S-VIDEO OUT
VIDEO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
AUDIO VIDEO
INPUT 2
R
L
UHF/VHF/CATV
75 Ω
P R
P B
Y VIDEO
COMPONENT
2
S-VIDEO
DVD Player
TV Back
What you will need for connections:
Component video cable – 1
Audio Cable – 1
RESET INPUT
POWER
VCR TV AUX
Remote Control
Press INPUT key after
connecting cables to access the A/V
inputs.
T here is NO need to tune to a blank
channel.
Connecting a Video Game or other equipment
Switch off TV and external equipment before connecting cables.
(Cables are not supplied.)
Connect game Audio Output (R/L) to the TV Audio Input (R/L).
Then connect game Video Output to the TV Video Input.
Press POWER to turn on the TV. Turn on external equipment
also.
To access Audio/Video inputs, press the INPUT key to select
GAME or select using the menu.
Using the Front Video and Audio Input Jacks
6
Component / Front A/V Input Jacks
What you will need for connections:
❶
Audio / Video cable – 1
VIDEO IN L- AUDIO -R MENU CH VOL POWER
VIDEO IN L- AUDIO -R
Video Game
Camecorder