Sony VGP-MR100 - Manual (Page 19)

Setup
19
To connect the Network Media Receiver to a TV via a VCR
Make the connection shown below.
To connect the Network Media Receiver to a TV with component video
input
Use a component video cable (not supplied) to connect the Network Media Receiver to the
component video input on the TV, as shown below. Insert each plug into the respective connector.
To audio/video input
Audio/video cable
(supplied)
To AUDIO/VIDEO
connectors
Component video
cable (not supplied)
To COMPONENT
VIDEO OUT connectors
To component
video input
l : Signal flow
l : Signal flow