Sony VGP-MR100 - Manual (Page 24)

24
When the computer is connected to the Internet not via dial-up
modem or is not connected to the Internet
System environment How to connect
E
Using an internal modem to connect to the Internet
F
Not connected to the Internet
G
Connecting to multiple computers in the E or F
environment
v
A router with built-in hub (or a stand-alone
hub) is required.
z
Hints
• To check whether your ADSL/cable modem has router capability, consult the instructions that came
with the modem, or contact your ADSL or cable internet provider.
• The default setting of the Network Media Receiver is “Automatic assignment (using router)”.
Depending on your system environment, this setting may have to be changed. For information on how
to do this, see page 33.
See “Case 3: Network connector of computer
is free” (page 27).
Note
After connection, set the IP address of the
computer to a fixed value, as described in
“Assigning a fixed IP address to the
computer” (page 27).
Network Media
Receiver
Network Media
Receiver
Network Media
Receiver
See “Case 3: Network connector of computer
is free” (page 27).
Note
After connection, set the IP address of the
computer to a fixed value, as described in
“Assigning a fixed IP address to the
computer” (page 27).
See “Case 1: Connecting via a router with
built-in hub” (page 25, G).
Note
When using a stand-alone hub, set the IP
address of the computer to a fixed value, as
described in “Assigning a fixed IP address to
the computer” (page 27).