Sony VGP-MR100 - Manual (Page 26)

26
Case 2: Connecting via a hub (system environment B)
LINE LAN
1 Depending on the respective system connection environment, the connection may be different. For
details, contact the technical support department of your Internet provider.
2 Use a router with built-in hub that supports 100BASE-TX. All the networked equipment must support
100BASE-TX for optimum playback experience.
Notes
• Use a router with a built-in hub (or stand-alone hub) that supports 100BASE-TX.
• Use network cables that support 100BASE-TX.
• The default setting of the Network Media Receiver is “Automatic assignment (using router)”.
Depending on your system environment, this setting may have to be changed. For information on how
to do this, see page 33.
z
Hint
As shown on the previous page and in the illustration above, multiple computers can be connected.
ADSL modem, cable modem, or
similar without router capability
1
(third-party)
Hub 2 (third-party)
Network cable
(not supplied)
Network cable
(supplied)
To NETWORK
connector
Computer 1
To NETWORK
connector
Network Media Receiver
To NETWORK
connector
Network cable
(not supplied)
Computer 2