Sony VGP-MR100 - Manual (Page 44)

44
Watching video sources
Video playback
The Network Media Receiver enables you to watch video stored on a server using a TV.
When you select a video file in the content list and press the SELECT button, the video playback
screen appears, and the video file begins to play.
00:10:00 / 01:00:15 High Quality L + R
:Options OPTIONS :Toggle Film Roll
Video Server - VAIO 1
Cruise, first day
z Hints
• If you select the most recently played video, playback automatically resumes from the point
where the previous playback was stopped.
• When playing high-definition video, the picture and sound may not be smooth if a wireless LAN
connection is used. For playback of high- definition video, use a network cable to connect the
Network Media Receiver to the computer.
To rewind or fast-forward video
Press the REW or FWD button. When the button is pressed once, the video rewinding or fast-
forwarding happens in 15- second. Press the button again to increase to 1 minute skips, and press
again to increase to 10 minute skips.
To stop rewinding or fast-forwarding, press the PLAY button.
During fast forward of video recorded at high quality settings, the remote control response may
become slower.
To stop video playback
Press the STOP button on the remote control. The content list appears again.
To pause video playback
Press the PAUSE button on the remote control. To resume playback, press the PLAY button again.
Switching the stereo settings
During playback of video with a stereo soundtrack, press the AUDIO button to switch the stereo
sound settings in the following sequence:
Stereo sound
t Left channel sound only t Right channel sound only t Stereo sound...