Sony VGP-MR100 - Manual (Page 54)

54
Changing the settings of the Network Media
Receiver
The settings of the Network Media Receiver can be changed using the “System Settings” screen.
To bring up the “System Settings” screen
1
Display the “Select a server...” screen.
• If the Network Media Receiver is not turned on, the “Select a server...” screen
will appear when you turn the unit on. For information on power-on, see
page 38.
• To bring up the “Select a server...” screen from another screen, press the TOP
button, and then the RETURN button on the remote control.
When the content list shows the top level of the computer, you can bring up the
“Select a server...” screen by pressing the RETURN button.
2
Press the OPTIONS button on the remote control.
The OPTIONS menu appears.
3
Use the V/v buttons to select “System Settings” , and press the
SELECT button.
The “System Settings” screen appears.
z Hint
If the standby indicator is lit green, you can also bring up the “System Settings” screen by pressing the
SETUP button on the side of the Network Media Receiver.