Operation without the remote control unit, Care and cleaning – Sanyo KHS0951 User Manual

Page 23

Advertising
background image

23

OI-351-23EG

Operation without the Remote
Control Unit

If you have lost the remote control unit or it has trouble, follow the steps below.

1.

When the air conditioner is not running

If you want to turn on the air conditioner, switch the operation selector to the
OFF position, and then to the ON position.

NOTE

The set temperature and fan speed are automatically set at the last
selection before stopping.

2.

When the air conditioner is running

If you want to turn off the air conditioner, switch the operation selector to the
OFF position.

Care and Cleaning

WARNING

1. For safety, be sure to turn the air conditioner off and also to disconnect

the power before cleaning.

2. Do not pour water on the indoor unit to clean it. This will damage the

internal components and cause an electric shock hazard.

Casing and Grille

(Indoor Unit)

Clean the casing and grille of the indoor unit with a vacuum cleaner brush,
or wipe them with a clean, soft cloth.

If these parts are stained, use a clean cloth moistened with a mild liquid
detergent. When cleaning the grille, be careful not to force the vanes out of
place.

CAUTION

1. Never use solvents, or harsh chemicals when cleaning the indoor unit.

Do not wipe the plastic casing using very hot water.

2. Some metal edges and the fins are sharp and may cause injury if handled

improperly; be especially careful when you clean these parts.

3. The internal coil and other components of the outdoor unit must be

cleaned every year. Consult your dealer or service center.

ON

OFF

TEST

INDOOR UNIT
KHS0951
KHS1251

Operation
selector

ON

OFF

TEST

KHS1852

Operation
selector

Advertising
This manual is related to the following products: