Sanyo KHS0951 - Manual (Page 24)

24
OI-351-24EG
1. With the ˝FRONT˝ mark facing
you, slide the anti-mold filter
up into the unit and then
lower the handle into the
groove on the unit.
2. After installing the anti-mold
filter, press the locations
marked by the arrows (
)
and close the air intake grille.
Care and Cleaning (continued)
Anti-mold filter The anti-mold filter behind the air intake grille should be checked and cleaned
at least once every two weeks.
How to remove the
anti-mold filter
1. Grasp both ends of the
air intake grille and
pull it out and up.
2. Push the anti-mold
filter up slightly, and
then pull it down.
Cleaning Use a vacuum cleaner to remove light dust. If there is sticky dust on the filter,
wash the filter in lukewarm, soapy water, rinse it in clean water and dry it.
How to replace the
anti-mold filter
Air intake grille
Anti-mold filter
Air intake grille
Anti-mold
filter
Insert into the groove on the unit.