Sharp FO-IS115N - Manual (Page 96)

Print Hold
91
7. Special Functions
Clearing the Print Hold code
To clear the Print Hold code, follow the steps below.
♦
Print Hold must be deactivated (see page 90) before you can clear the Print
Hold code.
1
Press , then until [PRT. HOLD CODE CLEAR] appears.
2
Press .
3
Enter the Print Hold code.
4
Press .
•
The display will briefly show [PRT. HOLD CODE CLEAR] / [CLEARED].
•
If the wrong code is entered, [WRONG PASSCODE] will appear. Go back
to Step 3. (If the wrong code is entered 3 times in a row, you will return to
the standby display.)
5
Press to exit.
PRINT HOLD
START
STOP