Sony FCB-EX980S - Manual (Page 33)

33
Basic Functions
Initial settings for the various functions of the FCB
camera are indicated in the “Initial settings” column.
The “Custom preset” column indicates whether the
custom preset function can be used to store the
settings. The function enables the stored settings to be
recalled automatically when the camera is turned on.
The “Standby backup” column indicates whether the
data is preserved even when the camera is powered
OFF.
Mode/Position setting Initial settings
Custom Back up
preset at standby
Zoom Position Wide end a a
D-Zoom On/Off On a a
D-Zoom Separate/Combine Combine a a
D-Zoom Position 00h a a
Focus Position — a a
Focus Auto/Manual Auto a a
Near Limit Setting 8000h (40cm) a a
AF Sensitivity Normal a a
AF Mode Normal a a
AF Run Time 5 sec a a
AF Interval 5 sec a a
WB Mode Auto a a
WB Data (Rgain, Bgain) — a a
One Push WB Data — a a
AE Mode Full Auto a a
Slow Shutter Mode Manual a a
Shutter Position 1/60sec (NTSC), 1/50sec (PAL) a a
Iris Position — a a
Gain Position — a a
Bright Position — a a
Exposure Compensation On/Off Off a a
Exposure Compensation Amount ±0 a a
BackLight On/Off Off a a
Spot AE On/Off Off a a
Spot AE Position Setting X=8, Y=8 a a
Aperture Level 5 a a
LR Reverse On/Off Off a a
Freeze On/Off Off
Ч Ч
Picture Effect Off a a
ICR On/Off Off a a
Auto ICR On/Off Off a a
Stabilizer On/Off Off a a
Camera Memory Same as the initial value setting a a
Display On/Off Off a a
Mute On/Off Off
Ч Ч
A circle “a” in this column signifies that the data is preserved.
A cross “
× ” signifies that the data IS NOT preserved.
Initial Settings, Custom Preset and Backup