Sony RS-232C - Manual (Page 22)

– 22 –
AUTO MIX EDIT PARAMETER: 43[H] 41[H] 4D[H] 50[H] ('CAMP')
This command is used to set up the parameter of the automatic mixer.
Caution
This command is supported by the SRP-X700P firmware versions of 1.20 and higher.
• Packet format
43[H] 41[H] 4D[H] 50[H] "parameter (14 bytes)" 0D[H]
• Parameter
The parameter consists of the 14 bytes all the time in the order as shown in the table below.
byte Parameter name
1st INPUT COMPRESSOR THRESHOLD
2nd INPUT COMPRESSOR RATIO
3rd INPUT COMPRESSOR ATTAC K TIME
4th INPUT COMPRESSOR RELEASE TIME
5th INPUT GATE THRESHOLD
6th INPUT GATE HOLD TIME
7th INPUT GATE RELEASE TIME
8th OUTPUT LIMITER THRESHOLD
9th OUTPUT LIMITER ATTACK TIME
10th OUTPUT LIMITER RELEASE TIME
11th FUNCTION ON/OFF
12th MIC INPUT ON/OFF
13th LINE OUTPUT 1-6 ON/OFF
14th LINE OUTPUT 7,8 REC OUT 1,2 ON/OFF