Star Trac Pro Upright Bike - Manual (Page 19)

STAR TRAC PRO BIKES O
WNER
’
S
G
UIDE
19
COOLDOWN CYCLE
In most programs, once you have completed your workout, the bike enters a two-minute Cooldown cycle.
NOTE: The Pro Bike software is programmed to properly decrease pedaling resistance to provide a cooldown.
To operate the bike during Cooldown:
1. You can adjust the difficulty LEVEL during Cooldown.
■ Use the keys to enter a difficulty LEVEL (from 1 to 20); or press the or key, as desired, to increase or
decrease the difficulty LEVEL in 1 unit increments.
■ When the desired difficulty LEVEL has been entered, press the key to accept the displayed LEVEL.
2. When the Cooldown cycle ends, your workout summary displays in the Information Window. If you wish to exit the
Cooldown cycle before it ends automatically, stop pedaling.
USING THE PERSONAL FAN
The STAR TRAC PRO BIKE is equipped with a built-in personal fan to increase your comfort during a workout. you can control
the fan speed during your workout.
To operate the personal fan:
■ Press the key, as necessary, to cycle the personal fan from OFF to HIGH to LOW to OFF. An LED indicator lights to
show the currently selected fan speed.
■ The fan remains set at the set speed if you pause your program.
■ The fan turns off automatically if you exit your workout, or when you complete your workout program.
HEART RATE MONITORING
Heart rate monitoring allows you to determine if your workout is too challenging or not challenging enough. Monitoring heart rate
is easy with the STAR TRAC PRO BIKE. You may use a heart rate strap (not provided with the Pro Bike), or you can simply
grasp the silver contact heart rate grips.
NOTE: The Heart Rate monitor is not a medical test, nor is it designed as a medical test. It is simply a guide to target heart rate
training. Please consult with your physician prior to engaging in any strenuous physical activity.
IMPORTANT: The manufacturer does not warrant the heart rate system performance on this product, as the heart rate system
performance varies, based on a user's physiology, fitness level, age, method of use and other factors. Furthermore, the heart rate
system is not for medical use.
C
ONTACT
H
EART
R
ATE
M
ONITORING
You may use the heart rate contact grips to automatically check your heart rate. Just follow these steps.
1. Grasp the stainless steel heart rate contact grips; you do not have to squeeze tightly.
2. It may take from 30 to 60 seconds for the heart rate system to acquire and display your heart rate.
3. When your heart rate has been acquired, the indicator, and your heart rate in beats per minute (BPM) displays in the
HEART RATE field of the Information Window.
4. Release the Heart Rate grips if you wish to remove your heart rate reading from the display.
C
HEST
S
TRAP
H
EART
R
ATE
M
ONITORING
You may use the heart rate strap to automatically check your heart rate. Just follow these steps:
1. Before beginning your workout, or during a pause, moisten the back of the transmitter on the heart rate strap (not
included). Place the strap snugly around your chest with the transmitter resting directly over your sternum.