Sony GDM-5510 - Manual (Page 4)

4
EN
Identifying parts and controls
See the pages in parentheses for further details.
1 INPUT (input) switch (page 6)
This switch selects the INPUT 1 (video input 1 (13W3)
connector: y1) or INPUT 2 (video input 2 (HD15)
connector: y2).
2 MENU button (page 7)
This button is used to display or close the menu.
3 Control button (OK, M/m) (page 8)
This button is used to make adjustments to the monitor and
call up the CONTRAST menu directly.
4 ! (power) switch and indicator (pages 5, 15, 19)
This button turns the monitor on and off. The power indicator
lights up in green when the monitor is turned on, and lights up
in orange when the monitor is in power saving mode.
5 AC IN connector (page 5)
This connector provides AC power to the monitor.
6 Video input 2 connector (HD15) (page 5)
This connector inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
7 Video input 1 connector (13W3) (page 5)
This connector inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
* DDC (Display Data Channel) is a standard of VESA.
**Pins serve a dual purpose as combined sync input and as H.sync input
if V.Sync is present on pin no. 7.
AC IN 2
1
5 6
7
Front Rear
INPUT MENU
OK 1 2
1 2 3 4
No. 6 Signal 7 Signal
A1 ––– Red
A2 ––– Green
A3 ––– Blue
1 Red Data Clock (SCL)*
2 Green
(Composite Sync on Green) DDC + 5V*
3 Blue –––
4 ID (Ground) DDC Ground*
5 DDC Ground* C Sync**
6 Red Ground Bi-Directional Data (SDA)*
7 Green Ground V. Sync
8 Blue Ground ID (100
Ω)
9 DDC + 5V* ID (100
Ω)
10 Ground Ground
11 ID (Ground) –––
12 Bi-Directional Data (SDA)* –––
13 H. Sync –––
14 V. Sync –––
15 Data Clock (SCL)* –––
5 4 3 2 1
6 7 8 9 10
11
A3
12 13 14 15
5 4 3 2 1
6 7 8 9 10
A2 A1
7 13W3 6 HD15