Sony GDM-5510 - Manual (Page 6)

6
EN
Selecting the on-screen menu
language (LANGUAGE)
English, French, German, Spanish, Italian, Dutch, Swedish,
Russian and Japanese versions of the on-screen menus are
available. The default setting is English.
1 Press the MENU button.
The menu appears on the screen.
2 Move the control button up or down to highlight
OPTION and press the control button.
3 Move the control button up or down to highlight
LANGUAGE and press the control button.
4 Move the control button up or down until the desired
language appears on the screen. Then press the
control button to select the language.
Each time you move the control button up and down, the
selectable languages appear cyclically.
• ENGLISH
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
• NEDERLANDS: Dutch
• SVENSKA: Swedish
•
: Russian
• : Japanese
To close the menu
Press the MENU button. If no buttons are pressed, the menu closes
automatically after about 45 seconds.
To reset to English
Select ENGLISH in step 4 above.
Selecting the input signal
You can connect two computers to this monitor using the video
input 1 (13W3) and video input 2 (HD15) connectors. To select
one of the two computers, use the INPUT switch.
Move the INPUT switch.
The selected connector appears on the screen for 3 seconds.
“INPUT 1” or “INPUT 2” appears on the screen.
Note
If no signal is input to the selected connector, NO SIGNAL appears on the
screen. After a few seconds, the monitor enters the power saving mode. If
this happens, switch to the other connector.
MENU
CONTRAST
CONTRAST
50
/ I BR GHT
1 0 2 4 x 7 6 8 / 8 5 H z
OK
MENU E
OPT ON I
CONTROL
LOCK
OFF
ON
X I T :
OK
OK
OPT ON I
LANGUAGE
ENGL I SH
MENU EX I T :
OK
INPUT
1 2