Sharp UX-A260 - Manual (Page 50)

Sending a Fax by Automatic Dialing
48
Sending a Fax by Automatic Dialing
You can store up to 40 fax or phone numbers in the machine for automatic
dialing. When you store a number, you select a two-digit Speed Dial number
for it.
♦
Auto-dial numbers are dialed by pressing , entering the two-digit
Speed Dial number, and then pressing .
♦
You can also search for an auto-dial number by pressing or until
the desired number appears in the display, and then to dial it.
Storing fax and phone numbers for automatic dialing
SPEED
START/MEMORY
START/MEMORY
1
Press once and once.
FUNCTION
5
When you hear the fax tone, press . Replace the handset.
•
If the transmission is completed successfully, the fax will beep once.
•
If an error occurs, the fax will beep three times and print a Transaction
Report to inform you of the problem (see page 77).
Note: If the transmission is unsuccessful and DOCUMENT JAMMED appears
in the display, remove the document as explained on page 89. (This may
occur if the other fax machine doesn’t respond properly when you attempt to
send the document.)
START/MEMORY
Display:
<NEW NUMBER>