Sharp UX-A260 - Manual (Page 55)

Sending a Fax by Automatic Dialing
53
3. Sen
d
ing
Fa
x
e
s
Searching for an auto-dial number
If you don’t remember the Speed Dial number in which you have stored a full
fax or phone number, follow these steps to search for the number.
1
If you are sending a fax, load the
document(s).
•
If desired, press to set the
resolution and/or contrast.
2
Press (or ) until the name of the other party appears in the
display (if no name was stored, the number will appear).
3
If you are sending a fax, press . Dialing and transmission
begins.
•
If the transmission is completed successfully, the fax will beep once.
•
If an error occurs, the fax will beep three times and print a Transaction
Report to inform you of the problem (see page 77).
If you are making a phone call, lift the handset. Dialing begins.
RESOLUTION/
RECEPTION MODE
START/MEMORY
READY TO SEND