Sony D-NF431 - Manual (Page 29)

Using the Radio
Listening to the Radio
You can enjoy FM and AM programs.
1
Press RADIO ON/BAND•MEMORY
(RADIO ON/BAND on the remote) to
turn on the radio.
2
Press RADIO ON/BAND•MEMORY
(RADIO ON/BAND on the remote)
until the band you want appears.
Each time you press the button, the
display changes as follows:
USA and Canadian models:
 FM  AM  TV  WB
Other models:  FM  AM
3
Press TUNE + or – ( + or – on the
remote) to tune in the station you
want and adjust the volume.
Turning off the radio
Press  •RADIO OFF.
Tuning in the station quickly
Press and hold TUNE + or – ( + or – on the
remote) in step 3 until the frequency digits
begin to change on the display. The CD player
automatically scans the radio frequencies and
stops when it finds a clear station.
Emphasizing the bass
sound
1 While listening to the radio, press
DISPLAY/MENU until the menu screen
appears.
2 Flick the jog lever toward  /  to select
“SOUND,” then press  .
3 Press  to select “BASS.”
4 Flick the jog lever toward  /  to select
“ON,” then press  to enter the
selection.
Improving broadcast reception
For FM, extend the earphones cord.
Earphones
For AM, reorient the CD player itself.
Note
Keep the earphones connected to the  jack of the
CD player. The earphones cord works as the FM
antenna.
If it is hard to hear the FM/
TV/WB broadcast due to
interference from strong
radio waves
1 While listening to the radio, press
DISPLAY/MENU until the menu screen
appears.
2 Flick the jog lever toward  /  to select
“OPTION,” then press  .
3 Flick the jog lever toward  /  to select
“LOCAL/DX,” then press  .
4 Flick the jog lever toward  /  to select
“LOCAL,” then press  .
Continued 
29
Using the Radio
D-NF430/NF431.GB.2-663-956-11(1)