Sony XR-3500MK2 - Manual (Page 8)

8
EN
Actual total number: Sony XR-3500MK2 (E) 3-810-725-51 (1)
Other Functions
Adjusting the Sound
Characteristics
1
Select the item you want to adjust by
pressing the
SEL button repeatedly.
VOL (volume) n BAS (bass) n TRE
(treble) n BAL (balance) n FAD (fader)
n
VOL (volume)
2
Adjust the selected item by pressing
either the
– or + button.
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as volume control button.)
Enjoying Bass and Treble
at Low Volume
— Loudness Function
Press the
LOUD
button. n “LOUD” will
appear on the display.
Bass and treble will be boosted. To cancel,
press again.
Muting the Beep Tone
Press the 5 button while pressing
the SEL button.
To reactivate the beep tone, press these buttons
once more.
Maintenance
Fuse Replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse
blows again after replacement, there may be an
internal malfunction. In such a case, consult
your nearest Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as
this could damage the unit.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing the RELEASE
button, then detach it and clean with a cotton
swab dipped in alcohol. Do not apply too
much force. Otherwise, the connector may get
damaged.
Fuse (15 A)
Main unit
Back of the front panel