SUPER MICRO Computer X6QTE+ - Manual (Page 14)

1-8
X6QT8/X6QTE+ User's Manual
Jumper Description Default Setting
J27 Processor Speed Strapping Enable On (Enabled)(*Chpt.2)
JBT1 CMOS Clear See Chapter 2
JFSB1 Front Side Bus Speed Select Off (200 MHz)
JP13 3rd Power Supply Fail Detect Off (Disabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 LAN1/LAN 2 Enable/Disable Pins 1-2 (Enabled)
JWD1 Watch Dog Enable Pins 1-2 (Reset)
Connector Description
ATX PWR Primary 24-pin ATX PWR Connector (JPW1) (Required)
8-pin PWR 12V 8-pin PWR Connectors (JPW2/JPW3) (Required)
Alarm Reset Power Supply Alarm Reset (JAR1)
Chassis Intrusion Chassis Intrusion Header (JL1)
COM1/COM2 COM1/COM2 Serial Port Connector/Header
Compact Flash PWR Compact Flash PWR (JWF1:IDE1, JWF2:IDE2)
DIMM A1-B8 Memory (RAM) Slots
FAN 1-9 CPU/Chassis/System Fan Headers
Floppy Floppy Disk Drive Connector
FP CTRL Front Control Panel Connector
GLAN 1/2 G-bit Ethernet Ports
IDE1, IDE2 IDE 1 & 2 Connectors (Compact Flash Card supported)
IPMI IPMI 2.0 Socket
JTAG JTAG Connector for the CPLD (JP2) (Note5, Pg 1-7)
KB/MS PS/2 Keyboard/Mouse
PWR LED/SPKR PWR LED (Pins1-3), Speaker (Pins 5-7) (JD1)
PWR Supply Fail PWR Supply Failure Header (J3P1)
PWR SMB (PSSMB) Power SMB I 2 C (System Management Bus)
SMB SMBus (System Management Bus) (J22)
Slot6 PCI-Ex8 in x16 slot
Speaker (SPKR) Internal Buzzer
I-SATA1/2 Intel Serial ATA0 (JS1), Serial ATA1 (JS2) Connectors
USB 0/1/2/3 Back Panel USB Ports (0/1), Front Panel USB (2/3)
VGA VGA Connector
WOL Wake-on-LAN Header (JWOL1)
WOR Wake-on-Ring Header (JWOR1)
LED Indicator Description
OH LED Overheat LED (JOH1)
Onboard PWR LED Power LED Indicator (LE1)
(*Note: The X6QTE+ supports up to 95W CPUs.)
Quick Reference (X6QTE+)