SUPER MICRO Computer X6QTE+ - Manual (Page 93)

Appendix C: Software Installation
C-5
Viewing Array Properties
To view the properties of an existing array:
1. At the BIOS prompt, press Ctrl+A.
2. From the ARC menu, select Array Confi guration Utility (ACU).
3. From the ACU menu, select Manage Arrays (as shown on the previous
screen.)
4. From the List of Arrays dialog box, select the array you want to view and press
Enter.
The Array Properties dialog box appears, showing detailed
information on the array. The physical disks associated with the array are displayed
here.
5. Press Esc to return to the previous menu.
Deleting Arrays
*Warning: Back up the data on an array before you delete it to prevent the loss of
data. Deleted arrays cannot be restored.
To delete an existing array:
1. Turn on your computer and press Ctrl+A when prompted to access the ARC
utility.
2. From the ARC main menu, select Array Confi guration Utility.
3. From the ACU menu, select Manage Arrays.
4. Select the array you wish to delete and press Delete.
5. In the Array Properties dialog box, select Delete and press Enter. The following
prompt is displayed:
*Warning!! Deleting the array will render array unusable. Do you want to delete
the array?(Yes/No):
RAID 1 only—the following prompt is also displayed:
Deleting the partition will result in data loss! Do you also want to delete the parti-
tion? (Yes/No):
6. Press Yes to delete the array or partition or No to return to the previous menu.
7. Press Esc to return to the previous menu.