Sony LMD-1950MD - Manual (Page 6)

Features
6
Disposal of the Unit
• Do not dispose of the unit with general waste.
Do not include the monitor with household waste.
• The fluorescent tube includes mercury. Dispose of the
monitor in accordance with the regulations of your
local sanitation authority.
Recommendation to Use more than
One Unit
• As problems can occasionally occur for the monitor,
when the monitor is used for safety control of
personnel, assets or stable picture, or for emergencies,
we strongly recommend you use more than one unit or
prepare a spare unit.
On Repacking
• Do not throw away the carton and packing materials.
They make an ideal container which to transport the
unit.
If you have any questions about this unit, contact your
authorized Sony dealer.
On Fan Error
• The fan for cooling the unit is built in. When the
“FAN ERROR” message is displayed, turn off the
power and contact an authorized Sony dealer.
Features
Compliance with medical safety
standards in America, Canada and
Europe
UL60601-1 for America, CSA C22.2 No.601.1 for
Canada and EN 60601-1 for Europe have been obtained
for this monitor.
The monitor is designed for use in the medical treatment
field, with the sheet switch, screen protect panel, etc.
Cabinet design with no heat vents
LMD-1950MD has been designed so that there are no
air vents for expelling heat from the unit. This design
prevents blood, chemical solutions, and dirt, which
could cause a trouble, from entering the unit. No dirt
accumulating in the main unit can come out.
Picture
Sophisticated I/P (Interlace to Progressive)
Conversion
The LMD-1950MD provides sophisticated I/P
conversion with Sony’s original X-Algorithm
technology. This technology combines the pixels above,
below and in the diagonal direction of the moving
picture part, and then inserts a natural pixel.
The direct result is much smoother image reproduction
for both moving and static picture areas.
Fully digital 10-bit signal processing circuit
As well as digital signals, all signals including analog
signals are converted into digital signals. All signals are
processed using a fully digital 10-bit processing circuit
so that an image is produced in smooth gradation
without any deterioration of quality.
Two color system available
The monitor can display NTSC and PAL signals by
connecting this unit.
Auto chroma/phase function
The chroma and phase of the decoder are automatically
adjusted with the auto chroma phase function.