Sony STR-DA90ESG - Manual (Page 24)

24
Playback/Recording
Selecting a Component
You can listen to or watch a connected component by
clicking on the component in the on-screen display.
Before you begin, make sure you have:
• Registered the IR codes for the connected
components (see pages 17 to 21).
• Turned MASTER VOL on the front panel to the
leftmost position (0) to avoid damaging your
speakers.
• Set the Auto Play function to ON. (The factory
setting is ON, see page 40.)
• Selected the appropriate speaker system (see page
10).
• Set BALANCE on the front panel to the center
position.
1
Press the button on the remote once or twice to
turn on the receiver.
The TV turns on automatically, and the main
menu appears. If the TV does not turn on
automatically, see pages 17 to 18 to register your
TV.
2
Click FUNCTION in the main menu.
3
Click the component you want.
The control buttons appear, then the component
turns on and starts playing automatically.
To listen to or watch Click* 1
TV programs* 2 or video tapes VIDEO 1, VIDEO 2
or VIDEO 3
Laser Discs (LD) or DVD LD/DVD
TV programs (only for Sony TV TV/DBS
with TV OUT jacks) or Digital
Broadcasting Satellites (DBS)*
2
Digital Audio Tapes (DAT) or DAT/MD
MiniDiscs (MD)
Compact Discs (CD) CD
Radio programs* 3 TUNER
Records PHONO* 4
Analog audio tapes TAPE
* 1 If you connect the component to jacks other than
those specified in the table, click the appropriate one
according to your connection (e.g., If you connect the
LD player to the VIDEO 3 jacks, click VIDEO 3 to
watch the LD).
* 2 For details about watching TV or controlling a DBS
receiver, see page 26.
* 3 For details about tuning radio stations, see page 27.
* 4 Control buttons do not appear when you select
PHONO.
4
Use MASTER VOL + or – on the remote to adjust
the volume.
To adjust the volume of the TV's speakers, use the
volume control on the TV.
To operate the selected component, click the
control buttons. For details of the functions of the
control buttons, see the instructions of the
selected component. To display other control
buttons for the selected component, click SUB.
To turn off the selected component
Click in the bottom left corner. To turn on the
component, follow steps 1 to 3.
Control buttons
FUNCTION SOUND SETUP
VIDEO 1 TAPE
DAT / MD
VIDEO 2
CD VIDEO 3
TUNER L D / DVD
PHONO TV / DBS
MACRO 1
MACRO 2
EXIT
FUNCTION SOUND SETUP
USER SUB INPUT
( ) 0 p P = +