Sony STR-DA90ESG - Manual (Page 56)

Front Panel Operations (Remote Short-cuts: USA and Canada only)
56
Playing Components Without
the TV (Flasher)
(except for USA and Canada)
Using the flasher function, you can control components
without using the TV's on-screen display. Instead, you
use the remote and the display on the front panel of the
receiver.
1
Press the FLASHER button on the remote to turn
off the on-screen display.
If you are listening to an audio source the TV
turns off automatically.
2
Press the left or right corner of the direction
control button repeatedly.
Each time you press the direction control button
the receiver displays a different operation (the
FUNCTION indicators also light to help separate
the different operations).
The operations available for each component are
shown below.
Component Operations
VIDEO 1, 2, 3 FLASHER OFF, POWER ON/OFF,
0, (, ), p, P, CH –, CH +, REC
LD/DVD FLASHER OFF, POWER ON/OFF,
0, (, ), p, P, =, +
CD FLASHER OFF, POWER ON/OFF*,
0, (, ), p, P, =, +,
DISC SKIP
TUNER FLASHER OFF, PRESET CH –,
PRESET CH +
TAPE FLASHER OFF, POWER ON/OFF,
0, (, ), p, P, REC
DAT FLASHER OFF, 0, (, ), p, P,
=, +, REC
MD FLASHER OFF, POWER ON/OFF,
0, (, ), p, P, =, +, REC
PHONO FLASHER OFF
TV/DBS FLASHER OFF, POWER ON/OFF,
CH –, CH +
* Sony CD player only.
3
Click the remote when the operation you want
appears in the front panel display.
The “<------>” and “<------” displays indicate that
no operations are available at the current flasher
position.
To select another component
Press the up or down corner of the direction control button.
The component names appear in the display one at a time.
If you select a video component, the TV will turn on
automatically.
To temporarily cancel the Flasher function
Press the left or right corner of the direction control button
repeatedly to display “FLASHER OFF”, then click the
remote.
You can also cancel by pressing FLASHER on the remote.
z
If you turn off the receiver while the Flasher
function is on
The next time the receiver is turned on “FLASHER
START” is displayed and the receiver turns on in the
flasher mode.