Sony DHC-MD5 - Manual (Page 24)

DHCMD5 3-858-048-11.EN (1)
24
Recording on an MD
manually
The system automatically locates the last
recorded portion and starts recording from
that point.
• This unit’s tuner and other analog
components
(e.g., a tape deck)
– The analog signal is converted to digital
and recorded (analog recording).
– A track number is marked at the beginning
of a recording, but when you turn on the
Level Sync function (see page 26), track
numbers are automatically marked in sync
with the level of the input signal.
* For details on limitations of digital recording, see
page 40.
**This signal conversion happens because this unit
does not have a digital input.
Note on the track number of an MD
On an MD, the track number (track sequence), track
start and end point information, etc., are recorded in
the TOC* area independent of the sound
information. You can edit recorded tracks quickly
by modifying the TOC information.
* TOC: Table Of Contents.
Before you start recording
(continued)
1
Insert a recordable MD.
2
Press FUNCTION and select the
source (e.g., CD) you want to
record.
3
Press r REC.
The deck is now ready for recording. To
mark track numbers, see “Marking track
numbers” next. When recording from
this unit’s CD, the track numbers are
automatically marked.
4
Press ∏ of the MD deck.
Recording starts.
5
Start playing the source to be
recorded.
2 1
3 4
π
∏ · π §
® ∏ · π §
º ‚