Sony DHC-MD5 - Manual (Page 35)

DHCMD5 3-858-048-11.EN (1)
35
6
Press CHARACTER repeatedly
until the desired sort of character
appears.
Each time you press the button, the
display changes as follows:
A (Upper cases) n a (Lower cases) n 0
(Numbers) n ! (Symbols)* n
(Space)
n A…
*You can use the following symbols.
7
Turn MULTI JOG until the desired
character appears.
To enter a blank space, press
CURSOR n while the cursor is
flashing.
8
Press CURSOR n.
The cursor shifts rightward and starts
flashing.
9
Repeat steps 6 to 8 to complete the
name.
If you made a mistake, press
CURSOR N or n until the
character you want to change
flashes, then repeat steps 6 to 8.
10
Press ENTER/YES.
To cancel labelling
Press π on the MD deck.
To erase the name
Repeat steps 1 to 5, then press EDIT/NO
repeatedly until all the letters are erased.
!"#$%&'()
∗
+,–./:;<=>?@_` (Space)
Falling asleep to
music
— Sleep Timer
You can let the system turn off at a preset
time, so you can sleep to the music. You can
preset the time to be turned off by 10
minutes.
Make sure you have set the clock (see page 5).
SLEEP
Press SLEEP on the remote.
Each time you press the button, the minute
display (the turn-off time) changes as follows:
90min n 80min n 70min —… n 10min
SLEEP OFF
To check the remaining time
Press SLEEP once.
To change the time to turn off
Select the time you want by pressing SLEEP.
To cancel the Sleep Timer function
Press SLEEP repeatedly until “SLEEP OFF”
appears.
N
N