Sony HT-DDW685 - Manual (Page 12)

12 GB
* The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
• The VIDEO 3 button on the remote is not available
for receiver operation.
Name Function
Q RETURN/
EXIT O
Press to return to the previous
menu or exit the menu while
the menu or on-screen guide
of the VCR, DVD player, or
satellite tuner is displayed on
the TV screen.
Press RETURN/EXIT O
and TV (O) at the same time
to return to the previous menu
or exit the TV’s menu while
the menu is displayed on the
TV screen.
R
V/v/B/b
After pressing AMP MENU
(E), DVD MENU (H), or
MENU (M), press
V, v, B or
b to select the settings. Then,
press
to enter the selection
for DVD MENU or MENU.
Press
also to enter the
selection of the receiver,
VCR, satellite tuner, Blu-ray
disc player or DVD player.
S DISPLAY
Press to select the information
displayed on the TV screen of
the VCR, satellite tuner, CD
player, Blu-ray disc player or
DVD player.
Press DISPLAY and TV (O)
at the same time to select TV
information displayed on the
TV screen.
T -/-- Press -/-- and TV (O) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
>10/
x
Press to select track numbers
over 10 of the VCR, satellite
tuner or CD player or to select
channel numbers of the
Digital CATV terminal.
CLEAR Press to clear a mistake when
you press the incorrect
numeric buttons.
Name Function
U Numeric
buttons
(number 5*)
Press to preset/tune to preset
stations or to select track
numbers of the CD player,
Blu-ray disc player or DVD
player or to select channel
numbers of the VCR or
satellite tuner. Press 0/10 to
select track number 10. Press
the numeric buttons and TV
(O) at the same time to select
the TV channels.
V AUTO CAL
Press to activate the Auto
Calibration function.
W TV INPUT
Press TV INPUT and TV (O)
at the same time to select the
input signal (TV input or
video input).
SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.