Woodstock SHOP FOX W1715 - Manual (Page 19)

-17-
N(.(,Fne\i jDXelXc D]^%J`eZ\)&'/
J<
K
L
G
Gifa\Zk`c\j k_ifne ]ifd k_\ dXZ_`e\
Zflc[ ZXlj\ j\i`flj \p\ `ealip% N\Xi
jX]\kp ^cXjj\j kf i\[lZ\ k_\ i`jb f]
`ealip%
Once the assembly is complete, test run the machine to
make sure it runs properly for regular operations.
The test run consists of verifying the following: 1) The
motor powers up and runs correctly, and 2) the safety
disabling mechanism on the switch works correctly.
If, during the test run, you cannot easily locate the source
of an unusual noise or vibration, stop using the machine
immediately, then review
KiflYc\j_ffk`e^ on GX^\*..
If you still cannot remedy a problem, contact our Tech
Support at (360) 734-3482 for assistance.
Kfk\jkilek_\dXZ_`e\#[fk_\j\jk\gj1
(% Read the entire instruction manual.
)% Make sure all tools and foreign objects have been
removed from the machine.
*% Connect the bandsaw to power.
+% Put on safety glasses and secure loose clothing or
long hair.
,% Raise the bandsaw by the handle.
-% Start the bandsaw while keeping your finger near
the ON/OFF switch at all times during the test run
(
=`^li\(0). The bandsaw should run smoothly with
little or no vibration.
— If you suspect any problems, immediately stop the
bandsaw and correct before continuing.
K\jkIle
=`^li\(0% ON/OFF switch.