Woodstock SHOP FOX W1715 - Manual (Page 36)

-34-
N(.(,Fne\i jDXelXc D]^%J`eZ\)&'/
J<I
M
@:<
Check the V-belt periodically for signs of glazing, cracking,
or fraying. If any of these conditions are present, change
the V-belt.
KfZ_Xe^\k_\M$Y\ck#[fk_\j\jk\gj1
(% DISCONNECT BANDSAW FROM POWER!
)% Loosen the V-belt tension hex bolt on the motor
mounting plate to allow the motor to pivot (see
=`^li\,().
*% Open the pulley cover door to access the V-belt, as
shown in =`^li\,).
+% Pivot the motor towards the gear box to release belt
tension and remove the V-belt.
,% Replace the V-belt and let the weight of the motor
provide the tension.
-% Secure the V-belt tension bolt.
:_Xe^`e^M$9\ck
=`^li\,(% V-belt tension hex bolt.
V-Belt Tension
Hex Bolt
=`^li\,)% Installing the V-belt.