SUPER MICRO Computer MIIC-203 - Manual (Page 17)

18
iPort Message Center for Windows
Introduction to Message Center
The iPort Message Center supports I
2
C Master Transmit and Receive
activities for all versions of the iPort I
2
C Bus Host Adapter. With this
program you can create, save, and execute scripts of I 2 C Master messages.
The MCC iPort Message Center Software, when used with an MCC iPort
allows a PC to become an I
2
C Master transmitter or receiving device,
sending I 2 C messages between the PC and one or more I 2 C devices across
an I
2
C Bus.
The iPort Message Center is designed to be a simple application for
experimenting with I
2 C messages. It provides methods to:
1. Edit a list of I 2 C Master Transmit or Receive Messages.
2. Save and/or Load a list of I
2
C Master messages to/from disk.
3. Transmit the current list of I
2
C Master messages, with the option to auto
repeat upon completion, or send on INT assert (low). (iPort/AFM only)
Each iPort Message Center I 2 C message can include up to 32 bytes of 8-bit
data, with an optional time delay at the completion of each message.