Overview, Structure of the control preset adj menu, Setting lists in the control preset adj menu – Sony BVM-D20F1U User Manual
Page 34: Control preset adj menu
![background image](/manuals/147478/34/background.png)
28
Chapter 2 Menu
PRESET A1
CH SET
MATRIX A2
MANUAL A11
AUTO A12
COPY FROM A13
PHASE
CHROMA
BRIGHT
CONTRAST
FULL FIELD WHITE 100%
8 COLOR BAR 100%
8 COLOR BAR 75%
7 COLOR BAR 100%
SMPTE COLOR BAR
EIA COLOR BAR
OTHER VALUE A131
OTHER MONITOR A132
MEMORY CARD A133
PRESET
CH SET
MONITOR ADDRESS A1321
FILE NAME A1331
PRESET
CH SET
PRESET
CH SET
The preliminary adjustments of contrast, brightness,
chroma and phase are carried out with the CONTROL
PRESET ADJ menu, to set the preset values to the
knobs for the above-mentioned adjustments.
Preset values can be set either commonly to all
channels or separately for individual channels.
Preset values can be set in the following ways:
• Adjustment with the MANUAL knobs (MANUAL
menu)
• Automatic adjustment (AUTO menu)
An external color bar signal is necessary.
This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is
preceded by a menu number. These numbers are not
displayed on the screen.
For more information about the menu number, see “About
menu numbers” on page 23.
Overview
• The arrow mark (
÷) refers you to another setting list
that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, the menu does not have
any sub-list.
[A]
CONTROL PRESET ADJ menu
Select either PRESET or CH SET.
÷[A1]
PRESET... : Set common values.
CH SET... : Set values for each individual channel.
MATRIX...: Set the data area for each individual
channel when CH SET is selected.
÷[A2]
Setting Lists in the CONTROL PRESET ADJ Menu
Structure of the CONTROL PRESET ADJ Menu
A
Preset Adjustment of the Picture Level Control
Knobs — CONTROL PRESET ADJ Menu
Level 1
Level 2
Level 3
Level 4
Level 5
• Copying data (COPY FROM menu)
Copying data from other channels, common data, or
other BVM-DxxE/DxxF series monitors that have
been connected via the serial remote connector, or
from data stored in monitor memory cards
Note
Data copy is impossible between monitors other than
BVM-DxxE/DxxF series.