Sony BVM-D20F1U - Manual (Page 61)

55
Chapter 2 Menu
C8111
INPUT CONFIGURATION C1
REMOTE C2
PASSWORD C3
SYSTEM CONFIGURATION C4
ON SCREEN SET C5
ALIGNMENT C6
WHITE UNIFORMITY C7
EXTEND MENU C8 ENTER PASSWORD
C81
RE-LOAD FACTORY
DATA C811
SLOT1 CONTROL
SLOT2 SDI 4:2:2/4 FSC 1)
SLOT3 EMPTY
SLOT4 EMPTY
SLOT5 EMPTY
SLOT6 VIDEO AMP
SLOT7 DEFLECTION
SLOT8 EMPTY
SLOT9 POWER SUPPLY
MEMORY CARD
C812 BACK UP SYSTEM
DATA C8121
RE-STORE SYSTEM
DATA C8122
Confirmation
message
Confirmation
message
RE-START MONITOR C813
ADJ INT SIGNAL C814
VCR MODE C815
MAINTENANCE C816
The following six functions can be executed with the
EXTEND menu.
• Loading factory default data for installed boards
into memory (RE-LOAD FACTORY DATA menu)
• Writing monitor setting and adjustment data to
the monitor memory card, or read setting and
adjustment data from the monitor memory card
(MEMORY CARD menu)
• Restarting the monitor (RE-START MONITOR
menu)
• Calibrating the internal signal level (ADJ INT
SIGNAL menu)
• Improving the skew of the picture from the
connected VCR (VCR MODE menu)
• Displaying the menu for maintenance
(MAINTENANCE menu)
Overview
[C8] Using Extended Functions (SET UP 8)
— EXTEND Menu
Level 1 Level 2 Level 3 Level 4 Level 5
1) This is displayed when the BKM-21D is installed in the SLOT 2.
Setting Lists of the EXTEND Menu
This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is
preceded by a menu number. These numbers are not
displayed on the screen.
For more information about the menu number, see “About
menu numbers” on page 23.
• The arrow mark ( ÷) refers you to another setting list
that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, the menu does not
have any sub-list.
Structure of the EXTEND Menu