Sony DAV-FX900W - Manual (Page 24)

24 US
After connecting the AC power cord (mains
lead), the demonstration appears in the front
panel display. When you press "/1 on the
remote, the demonstration turns off.
Note
• When you press "/1 on the system, the demonstration
does not turn off.
• When you set the demonstration mode in the AMP
menu to on, the demonstration does not turn off even
though you press "/1 on the remote. To turn off the
demonstration, set the demonstration mode to off,
then press "/1 on the remote. When the
demonstration mode is set to off, the system saves
power in standby mode.
Setting the demonstration
mode on/off
1
Press AMP MENU.
2
Press X/x repeatedly until “DEMO”
appears in the front panel display, then
press
or c.
3
Press X/x to select the setting.
• DEMO ON: sets the demonstration mode
on.
• DEMO OFF: sets the demonstration mode
off.
4
Press .
The setting is reflected.
5
Press AMP MENU.
The AMP menu turns off.
Getting Started – ADVANCED –
Turning off the
Demonstration
AMP MENU
"/1
X/x/c,