Sony DAV-FX900W - Manual (Page 93)

Ad
dit
ion
al I
n
fo
rmatio
n
93 US
Rated impedance 3.0 ohms
Dimensions (approx.) 92 Ч 593 Ч 80 mm
(3
5
/
8
Ч 23
3
/
8
Ч 3
1
/
4
inches)
(w/h/d)
280 Ч 1,200 Ч 280 mm
(11
1 /
8
Ч 47 1 /
4
Ч 11 1 /
8
inches) (w/h/d) with stand
(long)
280 Ч 715 Ч 280 mm
(11
1
/
8
Ч 28
1
/
4
Ч 11
1
/
8
inches) (w/h/d) with stand
(short)
Mass (approx.) 1.6 kg (3 lb 9 oz)
4.0 kg (8 lb 14 oz) with
stand (long)
3.5 kg (7 lb 12 oz) with
stand (short)
Center
Speaker system Closed, magnetically
shielded
Speaker unit 30 × 80 mm (1 3 /
16
× 3 1 /
4
inches) dia. cone type
Rated impedance 3.0 ohms
Dimensions (approx.) 380 Ч 47 Ч 61 mm
(15 Ч 1
7
/
8
Ч 2
1
/
2
inches)
(w/h/d)
Mass (approx.) 0.5 kg (1 lb 2 oz)
Subwoofer
Speaker system Bass reflex, magnetically
shielded
Speaker unit 200 mm (7 7 /
8
inches) dia.
cone type
Rated impedance 1.5 ohms
Dimensions (approx.) 170 Ч 396 Ч 442 mm
(6
3 /
4
Ч 15 5 /
8
Ч 17 1 /
2
inches) (w/h/d)
Mass (approx.) 8.1 kg (17 lb 14 oz)
General
Power requirements 120 V AC, 60 Hz
Power consumption On: 170 W
Standby: 0.3 W (at the
Power Saving mode)
Dimensions (approx.) 445 Ч 71 Ч 400 mm
(17
5 /
8
Ч 2 7 /
8
Ч 15 3 /
4
inches) (w/h/d) incl.
projecting parts
Mass (approx.) 6.0 kg (13 lb 4 oz)
Surround amplifier (TA-WR4)
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION
(FTC Output Power):
SL/SR: 84 W/ch 3 ohms at
160 - 20,000 Hz,
0.7 % THD
Surround mode (reference) RMS output power, 10 %
THD
140 W + 140 W
(with SS-TS55,
SS-TS56W)
Power requirements 120 V AC, 60 Hz
Power consumption 50 W
Dimensions (approx.) 280 Ч 60 Ч 280 mm
(11
1 /
8
Ч 2 3 /
8
Ч 11 1 /
8
inches) (w/h/d)
Mass (approx.) 1.6 kg (3 lb 9 oz)
Design and specifications are subject to change
without notice.
Unpacking
• Speakers (5)
• Subwoofer (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (5 m
× 5, 3 m × 1)
(16.5 ft.
× 5, 9.8 ft. × 1)
• Speaker cords (OPTION) (15 m
× 2) (50 ft. × 2) *
• Video Cord (1)
• Remote Commander (remote) (1)
• R6 (size AA) batteries (2)
• Calibration mic (1)
• Foot pads (1 set)
• Posts (long × 4, short × 4)
• Bases (4)
• Pedestal (4)
• Screws with washer (short) (8)
• Screws with washer (long) (24)
• Surround amplifier (1)
• Speaker base (1)
• Spacers (8)
• Guide pins (4)
• Screws (8)
• IR transmitter (1)**
• IR receiver cord (1)**
• Operating Instructions
• Speaker and TV connections (card) (1)
* Use for connecting the surround speakers to the
system by the speaker cords.
** The IR receiver cord and IR transmitter are for this
system only. You cannot use a commercially
available extension cord.