Sony UP-CR20L - Manual (Page 36)

36
Settings in Full Mode and Quick Print Mode
Ch
apt
er 3 Set
u
p
Setting the Passwords
When using this unit as a self-service photo kiosk in a
store, the store staff needs to verify the number of prints
and the charges, accept payment from the customer, and
then input a password before the photos can be printed.
The password is a four-digit number that is set beforehand
on the administration screen.
Password entry screen example
There are two types of passwords.
Administrator password
This password is needed to print photos and to display the
administration screen. This password is only used by the
person who is responsible for the setup and administration
of the unit.
Checkout password
This password is input when printing photos. This
password is used by staff in the course of serving
customers.
The procedure for setting the passwords is described
below.
1
Open the Administration tab on the administration
screen.
2
Touch the [ON] button under [Password].
3
Touch the [Administrator Password] button, and
enter a four-digit password.
4
Touch the [Checkout Password] button, and
enter a four-digit password.
Printing without requiring a password
To permit printing without the password input screen
appearing, touch the [OFF] button under [Password].